mObridge Audio iPod and Auxiliary interface

Standard Features

• Supports iPod Mini, 4th Gen, 4th Gen Photo, Nano, 2nd Gen Nano, iPod Video, 3rd Gen Nano, Classic, and Touch.
• Firmware upgradeable via memory card for future features.
• 24 bit ADC stereo for a more complete experience.
• 500uA Sleep Current. Lower sleep current draw than OEM specifications.
• Configurable for all vehicles via iTune's MP3 tag.
• Configurable for First five playlists, numbered playlists or full folder support for iPod browsing* .
• Paging to gain access to lists greater than the CD limitation of 99 giving full access to the iPod. Also possible on radio's without text support.
• Last disc, last folder, last track memory retention for fast startup.
• Access to Playlists/Artists/Albums/Genre/All Songs
• Random, Repeat, Scan
• Auxiliary input for external audio source.
• Exit iPod lockout mode for manual control with the ability to continue track up/down from the steering wheel controls.
• iPod USB charging
• Retention of factory CD Changer** .
• Bypass switch to remove interface from the MOST ring.
• Dedicated Auxiliary override for phone system input.

Detailed Specifications
Optic fiber conector:

• MOST vehicle interface with integrated wiring
• 12V input switch allowing for Aux audio override

iPod connector:

• iPod shielded cable and socket
• mObridge Audio interface configuration via iPod

Aux Input:

• Auxiliary audio input allowing line level input from any audio source.
• Selected via Disc6

Memory Card:

• Memory card allows for easy software upgrade.
• mObridge Audio interface configuration
• SD-Card and SDHC compatible
• Media streaming*

* Future software upgrade

mObridge Audio supports the following vehicles.

Note that it is an easy process to reconfigure mObridge Bluetooth for a different vehicle type.

Please refer to the Application Guide for full details of vehicle compatiblity.

Audi

• Monochrome MMI is not supported. 
• CD Changer Retention is supported.

BMW

• All BMW vehicles are required to be "coded" - ie have the CD changer enabled in the vehicle.  This requires some knowledge and access to either the dealer diagnostic tools or an aftermarket BMW coding solution such as Autologic.  mObridge can only supply limited support in the area of coding BMWs, and will not refund if the mObridge unit cannot be fitted due to an inability to code the vehicle.
  For further information on the coding of BMWs please refer to the Autologic web site.
• CD Changer Retention is not supported.
• 2005 MY 6-Series and 7-Series may need a Software Update of the i-Drive to support CD Text.  This is the responsibility of the installer to ensure the vehicle supports CD-Text.  mObridge cannot offer support in this case.

Mercedes-Benz

•  CD Changer Retention not possible.

Mini

• All Minis are required to be "coded" - ie have the CD changer
  enabled in the vehicle.  This requires some knowledge and access to
  either the dealer diagnostic tools or an aftermarket Mini coding
  solution such as Autologic.  mObridge can
  only supply limited support in the area of coding Minis, and will not
  refund if the mObridge unit cannot be fitted due to an inability to
  code the vehicle.
  For further information on the coding of BMWs please refer to the Autologic web site. 
• CD Changer Retention not supported.
• Post-2008 vehicles are not supported at this time.

Porsche

• PCM 3.0 is not supported at this time.
• CD Changer Retention not supported.

Saab

• Saab requires special software from mObridge that you must use when installing.  Before installing please contact us.

• mObridge Audio
• fiber-optic cable extension (1m)
• Auxiliary Audio Cable (2m)
• iPod cable (2m)
• Diagnostic loop for bypassing existing CDC
• Wiring harness
• Manual / Install Guide